A1000
Yüksek performans vektör kontrolü
Nominal değerler: 200 V Sınıfı trifaze 0,4 ila 110 kW; 400 V Sınıfı trifaze 0,4 ila 630 kW
- PG'li ve PG'siz akım vektör kontrolü
- Yüksek başlangıç torku (% 200/0,3 Hz, hız aralığı 1:200 OLV), (0 r/dk'da % 200, hız aralığı 1:1500 CLV)
- Çift değerli ND % 120/1dk ve HD % 150/1 dk
- IM ve PM Motorlar için Gelişmiş Otomatik Ayar
- PM Motorlar İçin Açık Döngü Kontrolü
- Düşük gürültülü Düşük taşıyıcı teknolojisi
- 10 yıl yaşam boyu tasarım
- Vidasız terminaller
- Bellek yedeklemeli Kontrol Terminalleri
- 24 VDC kontrol kartı güç besleme seçeneği
- Saha veriyolu haberleşmeleri: Modbus, Profibus, CANopen, DeviceNet, ML-II, PROFINET, EtherCAT ve EtherNet/IP
- Gömülü güvenlik: EN954-1 güvenlik kat. 3, durma kategorisi 0, IEC EN 61508 SIL 2 ve EN61800-5-1 (EDM'li)
- Seçenek olarak rejeneratif çözümler
- CE, UL, cUL ve TUV
Özellikler ve sipariş bilgisi
Ordering information
A1000
Specifications | Order code | ||||
---|---|---|---|---|---|
Voltage | Heavy Duty | Normal Duty | Standard | ||
200 V | 0.55 kW | 3.2 A | 0.75 kW | 3.5 A | CIMR-AC2A0004FAA |
1.1 kW | 5.0 A | 1.1 kW | 6.0 A | CIMR-AC2A0006FAA | |
1.5 kW | 8.0 A | 2.2 kW | 9.6 A | CIMR-AC2A0010FAA | |
2.2 kW | 11.0 A | 3.0 kW | 12.0 A | CIMR-AC2A0012FAA | |
4.0 kW | 17.5 A | 5.5 kW | 21.0 A | CIMR-AC2A0021FAA | |
5.5 kW | 25.0 A | 7.5 kW | 30.0 A | CIMR-AC2A0030FAA | |
7.5 kW | 33.0 A | 11.0 kW | 40.0 A | CIMR-AC2A0040FAA | |
11 kW | 47.0 A | 15.0 kW | 56.0 A | CIMR-AC2A0056FAA | |
15 kW | 60.0 A | 18.5 kW | 69.0 A | CIMR-AC2A0069FAA | |
18.5 kW | 75 A | 22 kW | 81 A | CIMR-AC2A0081FAA | |
22 kW | 85 A | 30 kW | 110 A | CIMR-AC2A0110AAA | |
30 kW | 115 A | 37 kW | 138 A | CIMR-AC2A0138AAA | |
37 kW | 145 A | 45 kW | 169 A | CIMR-AC2A0169AAA | |
45 kW | 180 A | 55 kW | 211 A | CIMR-AC2A0211AAA | |
55 kW | 215 A | 75 kW | 250 A | CIMR-AC2A0250AAA | |
75 kW | 283 A | 90 kW | 312 A | CIMR-AC2A0312AAA | |
90 kW | 346 A | 110 kW | 360 A | CIMR-AC2A0360AAA | |
110 kW | 415 A | 110 kW | 415 A | CIMR-AC2A0415AAA | |
400 V | 0.55 kW | 1.8 A | 0.75 kW | 2.1 A | CIMR-AC4A0002FAA |
1.1 kW | 3.4 A | 1.5 kW | 4.1 A | CIMR-AC4A0004FAA | |
1.5 kW | 4.8 A | 2.2 kW | 5.4 A | CIMR-AC4A0005FAA | |
2.2 kW | 5.5 A | 3.0 kW | 6.9 A | CIMR-AC4A0007FAA | |
3.0 kW | 7.2 A | 4.0 kW | 8.8 A | CIMR-AC4A0009FAA | |
4.0 kW | 9.2 A | 5.5 kW | 11.1 A | CIMR-AC4A0011FAA | |
5.5 kW | 14.8 A | 7.5 kW | 17.5 A | CIMR-AC4A0018FAA | |
7.5 kW | 18.0 A | 11.0 kW | 23.0 A | CIMR-AC4A0023FAA | |
11 kW | 24.0 A | 15.0 kW | 31.0 A | CIMR-AC4A0031FAA | |
15 kW | 31.0 A | 18.5 kW | 38.0 A | CIMR-AC4A0038FAA | |
18.5 kW | 39 A | 22 kW | 44 A | CIMR-AC4A0044FAA | |
22 kW | 45 A | 30 kW | 58 A | CIMR-AC4A0058AAA | |
30 kW | 60 A | 37 kW | 72 A | CIMR-AC4A0072AAA | |
37 kW | 75 A | 45 kW | 88 A | CIMR-AC4A0088AAA | |
45 kW | 91 A | 55 kW | 103 A | CIMR-AC4A0103AAA | |
55 kW | 112 A | 75 kW | 139 A | CIMR-AC4A0139AAA | |
75 kW | 150 A | 90 kW | 165 A | CIMR-AC4A0165AAA | |
90 kW | 180 A | 110 kW | 208 A | CIMR-AC4A0208AAA | |
110 kW | 216 A | 132 kW | 250 A | CIMR-AC4A0250AAA | |
132 kW | 260 A | 160 kW | 296 A | CIMR-AC4A0296AAA | |
160 kW | 304 A | 185 kW | 362 A | CIMR-AC4A0362AAA | |
185 kW | 370 A | 220 kW | 414 A | CIMR-AC4A0414AAA | |
220 kW | 450 A | 250 kW | 515 A | CIMR-AC4A0515AAA | |
315 kW | 605 A | 355 kW | 675 A | CIMR-AC4A0675AAA | |
450 kW | 810 A | 500 kW | 930 A | CIMR-AC4A0930AAA | |
560 kW | 1090 A | 630 kW | 1200 A | CIMR-AC4A1200AAA |
① Line filters
Inverter | Line filter | ||||||
---|---|---|---|---|---|---|---|
Rasmi | Schaffner | ||||||
Voltage | Model CIMR-AC_ (Normal duty) | Current (A) | Weight (kg) | Order code | Current (A) | Weight (kg) | Order code |
3-Phase 200VAC |
2A0004 / 2A0006 | 24 | 2.0 | A1000-FIA3024-RE | 10 | 1.2 | 3G3RV-PFI3010-SE |
2A0010 / 2A0012 / 2A0021 | 18 | 1.3 | 3G3RV-PFI3018-SE | ||||
2A0030 / 2A0040 | 52 | 2.4 | A1000-FIA2052-RE | 35 | 1.4 | 3G3RV-PFI2035-SE | |
2A0056 | 68 | 4.2 | A1000-FIA2068-RE | ||||
2A0069 / 2A0081 | 96 | 4.4 | A1000-FIA2096-RE | 60 | 3.0 | 3G3RV-PFI2060-SE | |
2A0110 / 2A0138 | 170 | 9.0 | A1000-FIA3170-RE | 100 | 4.9 | 3G3RV-PFI2100-SE | |
2A0169 | 170 | 6.0 | 3G3RV-PFI3170-SE | ||||
2A0211 | 300 | 13.2 | A1000-FIA3300-RE | ||||
2A0250 | – | – | – | ||||
2A0312 / 2A0360 / 2A0415 | 480 | 13.6 | A1000-FIA3480-RE | – | – | – | |
3-Phase 400VAC |
4A0002 / 4A0004 / 4A0005 / 4A0007 | 24 | 2.0 | A1000-FIA3024-RE | 10 | 1.2 | 3G3RV-PFI3010-SE |
4A0009 / 4A0011 | 18 | 1.3 | 3G3RV-PFI3018-SE | ||||
4A0018 / 4A0023 | 35 | 2.2 | 3G3RV-PFI3035-SE | ||||
4A0031 | 44 | 2.8 | A1000-FIA3044-RE | ||||
4A0038 | 60 | 4.0 | 3G3RV-PFI3060-SE | ||||
4A0044 | 52 | 3.9 | A1000-FIA3052-RE | ||||
4A0058 | 71 | 5.3 | A1000-FIA3071-RE | ||||
4A0072 | 100 | 4.5 | 3G3RV-PFI3100-SE | ||||
4A0088 | 105 | 6.5 | A1000-FIA3105-RE | ||||
4A0103 | 170 | 6.0 | 3G3RV-PFI3170-SE | ||||
4A0139 / 4A0165 | 170 | 9.0 | A1000-FIA3170-RE | ||||
4A0208 / 4A0250 | 300 | 13.2 | A1000-FIA3300-RE | 250 | 11.0 | 3G3RV-PFI3200-SE | |
4A0296 | 400 | 8.5 | 3G3RV-PFI3400-SE | ||||
4A0362 | 480 | 13.6 | A1000-FIA3480-RE | ||||
4A0414 / 4A0515 | 600 | 11.0 | 3G3RV-PFI3600-SE | ||||
4A0675 | 660 | 23.7 | A1000-FIA3660-RE | 800 | 31.0 | 3G3RV-PFI3800-SE | |
4A0930 / 4A1200 | – | – | – | – | – | – |
① Input AC
reactors
3-phase 200 VAC | 3-phase 400 VAC | ||
---|---|---|---|
Model CIMR-AC_ | Order code | Model CIMR-AC_ | Order code |
2A0004 / 2A0006 / 2A0010 | AX-RAI02800100-DE | 4A0002 / 4A0004 / 4A0005 | AX-RAI07700050-DE |
2A0012 / 2A0021 | AX-RAI00880200-DE | 4A0007 / 4A0009 / 4A0011 | AX-RAI03500100-DE |
2A0030 / 2A0040 | AX-RAI00350335-DE | 4A0018 / 4A0023 | AX-RAI01300170-DE |
2A0056 / 2A0069 | AX-RAI00180670-DE | 4A0031 / 4A0038 | AX-RAI00740335-DE |
2A0081 / 2A0110 | AX-RAI00091000-DE | 4A0044 / 4A0058 | AX-RAI00360500-DE |
2A0138 / 2A0169 | AX-RAI00071550-DE | 4A0072 / 4A0088 | AX-RAI00290780-DE |
2A0211 / 2A0250 | AX-RAI00042300-DE | 4A0103 / 4A0139 | AX-RAI00191150-DE |
2A0312 / 2A0360 / 2A0415 | – | 4A0165 / 4A0208 | AX-RAI00111850-DE |
– | 4A0250 / 4A0296 | AX-RAI00072700-DE | |
4A0362 / 4A0414 / 4A0515 / 4A0675 / 4A0930 / 4A1200 | – |
① DC reactors
3-phase 200 VAC | 3-phase 400 VAC | ||
---|---|---|---|
Model CIMR-AC_ | Order code | Model CIMR-AC_ | Order code |
2A0004 | AX-RC10700032-DE | 4A0002 | AX-RC43000020-DE |
2A0006 | AX-RC06750061-DE | 4A0004 | AX-RC27000030-DE |
2A0010 | AX-RC03510093-DE | 4A0005 | AX-RC14000047-DE |
2A0012 | AX-RC02510138-DE | 4A0007 | AX-RC10100069-DE |
2A0021 | AX-RC01600223-DE | 4A0009 / 4A0011 | AX-RC06400116-DE |
2A0030 | AX-RC01110309-DE | 4A0018 | AX-RC04410167-DE |
2A0040 | AX-RC00840437-DE | 4A0023 | AX-RC03350219-DE |
2A0056 | AX-RC00590614-DE | 4A0031 | AX-RC02330307-DE |
2A0069 | AX-RC00440859-DE | 4A0038 | AX-RC01750430-DE |
2A0081 | AX-RC00301275-DE | 4A0044 | AX-RC01200644-DE |
① Output AC
reactors
3-phase 200 VAC | 3-phase 400 VAC | ||
---|---|---|---|
Model CIMR-AC_ | Order code | Model CIMR-AC_ | Order code |
2A0004 | AX-RAO11500026-DE | 4A0002 / 4A0004 / 4A0005 | AX-RAO16300038-DE |
2A0006 | AX-RAO07600042-DE | 4A0007 | AX-RAO11800053-DE |
2A0010 | AX-RAO04100075-DE | 4A0009 / 4A0011 | AX-RAO07300080-DE |
2A0012 | AX-RAO03000105-DE | 4A0018 | AX-RAO04600110-DE |
2A0021 | AX-RAO01830160-DE | 4A0023 | AX-RAO03600160-DE |
2A0030 | AX-RAO01150220-DE | 4A0031 | AX-RAO02500220-DE |
2A0040 | AX-RAO00950320-DE | 4A0038 | AX-RAO02000320-DE |
2A0056 | AX-RAO00630430-DE | 4A0044 | AX-RAO01650400-DE |
2A0069 | AX-RAO00490640-DE | 4A0058 | AX-RAO01300480-DE |
2A0081 | AX-RAO00390800-DE | 4A0072 | AX-RAO01030580-DE |
2A0110 | AX-RAO00330950-DE | 4A0088 | AX-RAO00800750-DE |
2A0138 | AX-RAO00251210-DE | 4A0103 | AX-RAO00680900-DE |
2A0169 | AX-RAO00191450-DE | 4A0139 | AX-RAO00531100-DE |
2A0211 | AX-RAO00161820-DE | 4A0165 | AX-RAO00401490-DE |
2A0250 | AX-RAO00132200-DE | 4A0208 | AX-RAO00331760-DE |
2A0312 / 2A0360 / 2A0415 | – | 4A0250 | AX-RAO00262170-DE |
– | 4A0296 | AX-RAO00212600-DE | |
4A0362 / 4A0414 / 4A0515 / 4A0675 / 4A0930 / 4A1200 | – |
This table corresponds with HD rating. When ND is used, please choose the reactor for the next size inverter.
① Chokes
Diameter | Description | Order code |
---|---|---|
21 | For 2.2 KW motors or below | AX-FER2102-RE |
25 | For 15 KW motors or below | AX-FER2515-RE |
50 | For 45 KW motors or below | AX-FER5045-RE |
60 | For 55 KW motors or below | AX-FER6055-RE |
② Communication
cards
Type | Description | Function | Order code |
---|---|---|---|
Communication option board | DeviceNet option card | Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through DeviceNet communication with the host controller. | SI-N3 |
PROFIBUS-DP option card | Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through PROFIBUS-DP communication with the host controller. | SI-P3 | |
CANopen option card | Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through CANopen communication with the host controller. | SI-S3 | |
MECHATROLINK-II option card | Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through MECHATROLINK-II communication with the host controller. | SI-T3 | |
EtherCAT option card | Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through EtherCAT communication with the host controller. | EUOP-SI-ES3 | |
PROFINET option card | Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through PROFINET communication with the host controller. | SI-EP3 | |
EtherNet/IP option card
2
EtherNet/IP option
card not available for CIMR-AC4A0930 and CIMR-AC4A1200 models. |
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through EtherNet/IP communication with the host controller. | SI-EN3 |
③ Accessories
Types | Description | Functions | Order code |
---|---|---|---|
Digital operator | LCD remote operator | LCD Display operator with language support | JVOP-180 |
Remote operator cable | 3 meters cable for connecting remote operator | 3G3AX-CAJOP300-EE | |
Accessories | USB converter / USB cable | USB converter unit with copy and backup function | JVOP-181 |
24 VDC option board | 24V DC control board power supply, 200 V class | PS-A10LB | |
24V DC control board power supply, 400 V class | PS-A10HB | ||
PC connection cable | RS232 PC tool connection cable | A1000-CAVPC232-EE |
④ Computer
software
Types | Description | Installation | Order code |
---|---|---|---|
Software | Computer software | Configuration and monitoring software tool | CX-Drive |
Computer software | Configuration and monitoring software tool | CX-One |
⑤ D1000 kit
- DC Supply with Regenerative Active Front End
Rated power kW | D1000 kit | |||
---|---|---|---|---|
Regenerative DC bus supply unit (D1000)
2
It is not possible to purchase the Regenerative DC bus supply unit (D1000), EMC filter and low harmonic filter as a separate items. |
EMC filter
2
It is not possible to purchase the Regenerative DC bus supply unit (D1000), EMC filter and low harmonic filter as a separate items. |
Low harmonic filter
2
It is not possible to purchase the Regenerative DC bus supply unit (D1000), EMC filter and low harmonic filter as a separate items. |
Order code | |
5 | CIMR-DC4A0005BAA | B84143A0020R106 | B84143G0008R176 | D1KIT40005AAAAB |
10 | CIMR-DC4A0010BAA | B84143G0016R176 | D1KIT40010AAAAB | |
20 | CIMR-DC4A0020BAA | B84143A0035R106 | B84143G0030R176 | D1KIT40020AAAAB |
30 | CIMR-DC4A0030AAA | B84143A0065R106 | B84143G0043R176 | D1KIT40030AAAAB |
40 | CIMR-DC4A0040AAA | B84143G0058R176 | D1KIT40040AAAAB | |
60 | CIMR-DC4A0060AAA | B84143B0180S080 | B84143G0086R176 | D1KIT40060AAAAB |
100 | CIMR-DC4A0100AAA | B84143G0145R176 | D1KIT40100AAAAB | |
130 | CIMR-DC4A0130AAA | B84143B0400S080 | B84143G0210S176 | D1KIT40130AAAAB |
185 | CIMR-DC4A0185AAA | B84143G0300S176 | D1KIT40185AAAAB | |
270 | CIMR-DC4A0270AAA | B84143B1000S080 | B84143G0410S176 | D1KIT40270AAAAB |
370 | CIMR-DC4A0370AAA | B84143G0560S176 | D1KIT40370AAAAB | |
630 | CIMR-DC4A0630AAA | B84143B1600S080 | B84143G1140S176 | D1KIT40630AAAAB |
⑤ R1000 kit
- Regenerative Braking unit
Rated power kW | R1000 kit | ||
---|---|---|---|
Regenerative braking unit (R1000)
2
It is not possible to purchase the Regenerative
braking unit (R1000) and current suppression reactor as a separate
items. |
Current suppression reactor (1%)
2
It is not possible to purchase the Regenerative
braking unit (R1000) and current suppression reactor as a separate
items. |
Order code | |
3.5 | CIMR-RC4A03P5FAA | B1509105 | R1KIT40003AAAAA |
5 | CIMR-RC4A0005FAA | R1KIT40005AAAAA | |
7 | CIMR-RC4A0007FAA | B1509106 | R1KIT40007AAAAA |
10 | CIMR-RC4A0010FAA | B1509107 | R1KIT40010AAAAA |
14 | CIMR-RC4A0014FAA | B1509108 | R1KIT40014AAAAA |
17 | CIMR-RC4A0017FAA | R1KIT40017AAAAA | |
20 | CIMR-RC4A0020FAA | B1509109 | R1KIT40020AAAAA |
28 | CIMR-RC4A0028FAA | B1509110 | R1KIT40028AAAAA |
35 | CIMR-RC4A0035AAA | B1504118 | R1KIT40035AAAAA |
43 | CIMR-RC4A0043AAA | B1509111 | R1KIT40043AAAAA |
53 | CIMR-RC4A0053AAA | B1509112 | R1KIT40053AAAAA |
73 | CIMR-RC4A0073AAA | B1509113 | R1KIT40073AAAAA |
105 | CIMR-RC4A0105AAA | B1509114 | R1KIT40105AAAAA |
150 | CIMR-RC4A0150AAA | B1505002 | R1KIT40150AAAAA |
210 | CIMR-RC4A0210AAA | B1505008 | R1KIT40210AAAAA |
300 | CIMR-RC4A0300AAA | B1505011 | R1KIT40300AAAAA |
⑤ Braking
unit, braking resistor unit
Inverter | Braking unit | Braking Resistor
2 (10%
ED)When connecting
a mounting type resistor or braking resistor unit, set system constant
L3-04 to 0 (Stall prevention disabled during deceleration). Motor
will not stop at set deceleration time if this constant is not changed.
Additionally the Internal braking transistor protection (L8-55)
should be set to “0” when a external braking unit (CDBR-) is used. |
Connectable min. resistance Ω |
||||||
---|---|---|---|---|---|---|---|---|---|
Max. Applicable Motor kW |
Model CIMR-A__A_ |
Order code | Qty | Order code | Specifications of Resistor |
Qty | |||
200 V Class | 0.4 | 0004 HD | Built-in | AX-REM00K2070-IE | 200W | 70 Ω | 1 | 48 | |
0.75 | 0004 ND | 48 | |||||||
0006 HD | |||||||||
1.1 | 0006 ND | 48 | |||||||
0008 HD | AX-REM00K4075-IE | 400W | 75 Ω | 1 | |||||
1.5 | 0008 ND | 48 | |||||||
0010 HD | |||||||||
2.2 | 0010 ND | 48 | |||||||
0012 HD | AX-REM00K4035-IE | 400W | 35 Ω | 1 | 16 | ||||
3.0 | 0012 ND | 16 | |||||||
0018 HD | |||||||||
3.7 | 0018 ND | 16 | |||||||
0021 HD | |||||||||
5.5 | 0021 ND | AX-REM00K6035-IE | 600W | 35 Ω | 1 | 16 | |||
0030 HD | |||||||||
7.5 | 0030 ND | AX-REM00K9020-IE | 900W | 20 Ω | 1 | 16 | |||
0040 HD | 9.6 | ||||||||
11 | 0040 ND | AX-REM02K1017-IE | 2100W | 17 Ω | 1 | 9.6 | |||
0056 HD | |||||||||
15 | 0056 ND | AX-REM03K5010-IE | 3500W | 10 Ω | 1 | 9.6 | |||
0069 HD | |||||||||
18.5 | 0069 ND | 9.6 | |||||||
0081 HD | |||||||||
22 | 0081 ND | 9.6 | |||||||
0110 HD | AX-REM19K0008-IE | 19000W | 8 Ω | 1 | 6.4 | ||||
30 | 0110 ND | 6.4 | |||||||
0138 HD | |||||||||
37 | 0138 ND | 6.4 | |||||||
0169 HD | AX-BCR2035090-TE | 1 | |||||||
45 | 0169 ND | AX-BCR2070130-TE | 1 | 6.4 | |||||
0211 HD | |||||||||
55 | 0211 ND | 6.4 | |||||||
0250 HD | |||||||||
75 | 0250 ND | AX-BCR2035090-TE | 2 | AX-REM19K0006-IE | 19000W | 6 Ω | 1 | 1.6 | |
0312 HD | |||||||||
90 | 0312 ND | AX-BCR2070130-TE | 2 | 2 | 1.6 | ||||
0360 HD | |||||||||
110 | 0360 ND | AX-BCR2035090-TE | 3 | 1.6 | |||||
0415 HD | |||||||||
400 V Class | 0.4 | 0002 HD | Built in | AX-REM00K1200-IE | 100W | 200 Ω | 1 | 96 | |
0.75 | 0002 ND | 96 | |||||||
0004 HD | |||||||||
1.5 | 0004 ND | AX-REM00K2200-IE | 200W | 200 Ω | 1 | 96 | |||
0005 HD | 64 | ||||||||
2.2 | 0005 ND | 64 | |||||||
0007 HD | |||||||||
3.0 | 0007 ND | 64 | |||||||
0009 HD | AX-REM00K4075-IE | 400W | 75 Ω | 1 | 32 | ||||
3.7 | 0009 ND | 32 | |||||||
0011 HD | |||||||||
5.5 | 0011 ND | AX-REM00K6100-IE | 600W | 100 Ω | 1 | 32 | |||
0018 HD | |||||||||
7.5 | 0018 ND | AX-REM00K9070-IE | 900W | 70 Ω | 1 | 32 | |||
0023 HD | |||||||||
11 | 0023 ND | AX-REM01K9070-IE | 1900W | 70 Ω | 1 | 32 | |||
0031 HD | 20 | ||||||||
15 | 0031 ND | AX-REM03K5035-IE | 3500W | 35 Ω | 1 | 20 | |||
0038 HD | |||||||||
18.5 | 0038 ND | AX-REM19K0030-IE | 19000W | 30 Ω | 1 | 20 | |||
0044 HD | 19.2 | ||||||||
22 | 0044 ND | 19.2 | |||||||
0058 HD | |||||||||
30 | 0058 ND | AX-REM19K0020-IE | 19000W | 20 Ω | 1 | 19.2 | |||
0072 HD | |||||||||
37 | 0072 ND | 19.8 | |||||||
0088 HD | AX-BCR4017068-TE | 1 | 12.8 | ||||||
45 | 0088 ND | 12.8 | |||||||
0103 HD | |||||||||
55 | 0103 ND | AX-BCR4035090-TE | 1 | 12.8 | |||||
0139 HD | AX-REM19K0030-IE | 19000W | 30 Ω | 1 | 19.2 | ||||
75 | 0139 ND | 19.2 | |||||||
0165 HD | AX-REM19K0020-IE | 19000W | 20 Ω | 1 | 12.8 | ||||
90 | 0165 ND | AX-BCR4070130-TE | 1 | 12.8 | |||||
0208 HD | |||||||||
110 | 0208 ND | AX-BCR4090240-TE | 1 | AX-REM19K0006-IE | 19000W | 6 Ω | 1 | 3.2 | |
0250 HD | |||||||||
132 | 0250 ND | AX-REM38K0012-IE | 38000W | 12 Ω | 1 | 3.2 | |||
0296 HD | |||||||||
160 | 0296 ND | AX-BCR4035090-TE | 2 | 3.2 | |||||
0362 HD | |||||||||
185 | 0362 ND | AX-BCR4070130-TE | 2 | 3.2 | |||||
0414 HD | |||||||||
220 | 0414 ND | AX-BCR4090240-TE | 2 | AX-REM19K0006-IE | 19000W | 6 Ω | 3 | 3.2 | |
0515 HD | |||||||||
250 | 0515 ND | 3.2 | |||||||
315 | 0675 HD | 3 | 3.2 | ||||||
355 | 0675 ND | 3.2 |
⑥ Feedback
speed option card
Type | Description | Function | Order code |
---|---|---|---|
PG option card | Motor PG feedback open collector interface |
For speed feedback input by connecting a motor encoder Input: 3track (one or two tracks), for HTL encoder connection, 50KHz max Output: 3track, open collector Encoder power supply: 12V, 200mA max |
PG-B3 |
Motor PG feedback line driver interface |
For speed feedback input by connecting a motor encoder Input: 3 track (one or two tracks), line driver, 300kHz max Output: 3 track, line driver Encoder power supply: 5V or 12V, 200mA max |
PG-X3 | |
EnDat encoder | For speed feedback input by connecting a motor encoder Encoder type: EnDat 2.1/01, EnDat 2.2/01, EnDat 2.2/22 (HEIDENHAIN) Maximum input frequency: 50 kHz Pulse monitor: Matches RS-422 level Output voltage: 5V±5%, 8V±10% Maximum output current: 200 mA Wiring length: 20 m max. for the encoder, 30 m max. for the pulse monitor |
PG-F3
2
This option
card can only be used in CLV/PM. |
|
Motor feedback resolver interface |
For motor speed feedback by connecting a resolver (TS2640N321E64 by Tamagawa Seiki Co., LTD) Input voltage: 7 VAC rms 10 kHz Transformation ratio: 0.5±5% Maximum input current: 100 mA rms |
PG-RT3 |
Specifications
Inverter
200 V class
Three-phase: CIMR-A_2A | 0004 | 0006 | 0010 | 0012 | 0021 | 0030 | 0040 | 0056 | 0069 | 0081 | 0110 | 0138 | 0169 | 0211 | 0250 | 0312 | 0360 | 0415 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Motor kW
2
Based
on a standard 4-pole motor for maximum applicable motor output. |
For HD setting | 0.55 | 1.1 | 1.5 | 2.2 | 4.0 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | 90 | 110 |
For ND setting | 0.75 | 1.1 | 2.2 | 3.0 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | 90 | 110 | 110 | |
Output characteristics |
Inverter capacity kVA
at HD
2
Rated motor capacity is calculated
with a rated output voltage of 220 V. |
1.2 | 1.9 | 3 | 4.2 | 6.7 | 9.5 | 12.6 | 17.9 | 23 | 29 | 32 | 44 | 55 | 69 | 82 | 108 | 132 | 158 |
Inverter capacity kVA
at ND
2
Rated motor capacity is calculated
with a rated output voltage of 220 V. |
1.3 | 2.3 | 3.7 | 4.6 | 8 | 11.4 | 15.2 | 21 | 26 | 31 | 42 | 53 | 64 | 80 | 95 | 119 | 137 | 158 | |
Rated output current (A) at HD | 3.2
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
5
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
8
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
11
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
17.5
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
25
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
33
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
47
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
60
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
75
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
85
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
115
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
145
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
180
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
215
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
283
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
346
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
415
2
Carrier frequency is set to 2kHz.
Current derating is required in order to raise the carrier frequency. |
|
Rated output current (A)
at ND
2
Carrier frequency is set to 2kHz.
Current derating is required in order to raise the carrier frequency. |
3.5 | 6 | 9.6 | 12 | 21 | 30 | 40 | 56 | 69 | 81 | 110 | 138 | 169 | 211 | 250 | 312 | 360 | 415 | |
Max. output voltage | Proportional to input voltage: 0..240 V | ||||||||||||||||||
Max. output frequency | 400 Hz | ||||||||||||||||||
Power supply | Rated input voltage and frequency | 3-phase 200..240 V 50/60 Hz | |||||||||||||||||
Allowable voltage fluctuation | –15%..+10% | ||||||||||||||||||
Allowable frequency fluctuation | +5% | ||||||||||||||||||
Input Current (A) at HD
2
Assumes operation at rated output current.
Input current rating varies depending on the power supply transformer,
input reactor, wiring conditions, and power supply impedance. |
2.9 | 5.8 | 7.5 | 11 | 18.9 | 28 | 37 | 52 | 68 | 80 | 82 | 111 | 136 | 164 | 200 | 271 | 324 | 394 | |
Input Current (A) at ND
2
Assumes operation at rated output current.
Input current rating varies depending on the power supply transformer,
input reactor, wiring conditions, and power supply impedance. |
3.9 | 7.3 | 10.8 | 13.9 | 24 | 37 | 52 | 68 | 80 | 96 | 111 | 136 | 164 | 200 | 271 | 324 | 394 | 471 |
400 V class
Three-phase: CIMR-A_4A | 0002 | 0004 | 0005 | 0007 | 0009 | 0011 | 0018 | 0023 | 0031 | 0038 | 0044 | 0058 | 0072 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Motor kW
2
Based
on a standard 4-pole motor for maximum applicable motor output. |
For HD setting | 0.55 | 1.1 | 1.5 | 2.2 | 3.0 | 4.0 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 |
For ND setting | 0.75 | 1.5 | 2.2 | 3.0 | 4.0 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | |
Output characteristics |
Inverter capacity kVA
at HD
2
Rated motor capacity is calculated
with a rated output voltage of 440 V. |
1.4 | 2.6 | 3.7 | 4.2 | 5.5 | 7 | 11.3 | 13.7 | 18.3 | 24 | 30 | 34 | 48 |
Inverter capacity kVA
at ND
2
Rated motor capacity is calculated
with a rated output voltage of 440 V. |
1.6 | 3.1 | 4.1 | 5.3 | 6.7 | 8.5 | 13.3 | 17.5 | 24 | 29 | 34 | 44 | 55 | |
Rated output current (A) at HD | 1.8
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
3.4
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
4.8
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
5.5
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
7.2
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
9.2
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
14.8
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
18
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
24
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
31
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
39
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
45
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
60
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
|
Rated output current (A)
at ND
2
Carrier frequency is set to 2kHz. Current derating is required
in order to raise the carrier frequency. |
2.1 | 4.1 | 5.4 | 6.9 | 8.8 | 11.1 | 17.5 | 23 | 31 | 38 | 44 | 58 | 72 | |
Max. output voltage | 380..480V (proportional to input voltage) | |||||||||||||
Max. output frequency | 400 Hz | |||||||||||||
Power supply | Rated input voltage and frequency | 3-phase 380..480 VAC, 50/60 Hz | ||||||||||||
Allowable voltage fluctuation | –15%..+10% | |||||||||||||
Allowable frequency fluctuation | +5% | |||||||||||||
Input Current (A) at HD
2
Assumes operation at rated output current.
Input current rating varies depending on the power supply transformer,
input reactor, wiring conditions, and power supply impedance. |
1.8 | 3.2 | 4.4 | 6 | 8.2 | 10.4 | 15 | 20 | 29 | 39 | 44 | 49 | 58 | |
Input Current (A) at ND
2
Assumes operation at rated output current.
Input current rating varies depending on the power supply transformer,
input reactor, wiring conditions, and power supply impedance. |
2.1 | 4.3 | 5.9 | 8.1 | 9.4 | 14 | 20 | 24 | 38 | 44 | 52 | 58 | 71 |
Three-phase: CIMR-A_4A | 0088 | 0103 | 0139 | 0165 | 0208 | 0250 | 0296 | 0362 | 0414 | 0515 | 0675 | 0930 | 1200 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Motor kW
2
Based
on a standard 4-pole motor for maximum applicable motor output. |
For HD setting | 37 | 45 | 55 | 75 | 90 | 110 | 132 | 160 | 185 | 220 | 315 | 450 | 560 |
For ND setting | 45 | 55 | 75 | 90 | 110 | 132 | 160 | 185 | 220 | 250 | 355 | 500 | 630 | |
Output characteristics |
Inverter capacity kVA
at HD
2
Rated motor capacity is calculated
with a rated output voltage of 440 V. |
57 | 69 | 85 | 114 | 137 | 165 | 198 | 232 | 282 | 343 | 461 | 617 | 831 |
Inverter capacity kVA
at ND
2
Rated motor capacity is calculated
with a rated output voltage of 440 V. |
67 | 78 | 106 | 126 | 159 | 191 | 226 | 276 | 316 | 392 | 514 | 709 | 915 | |
Rated output current (A) at HD | 75
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
91
2
Carrier frequency
can be increased up to 8 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
112
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
150
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
180
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
216
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
260
2
Carrier frequency
can be increased up to 5 kHz while keeping this current rating.
Higher carrier frequency settings require derating. |
304
2
Carrier frequency is set to 2kHz.
Current derating is required in order to raise the carrier frequency. |
370 | 450 | 605 | 810 | 1090 | |
Rated output current (A)
at ND
2
Carrier frequency is set to 2kHz.
Current derating is required in order to raise the carrier frequency. |
88 | 103 | 139 | 165 | 208 | 250 | 296 | 362 | 414 | 515 | 675 | 930 | 1200 | |
Max. output voltage | 380..480V (proportional to input voltage) | |||||||||||||
Max. output frequency | 400 Hz | |||||||||||||
Power supply | Rated input voltage and frequency | 3-phase 380..480 VAC, 50/60 Hz | ||||||||||||
Allowable voltage fluctuation | –15%..+10% | |||||||||||||
Allowable frequency fluctuation | +5% | |||||||||||||
Input Current (A) at HD
2
Assumes operation at rated output current.
Input current rating varies depending on the power supply transformer,
input reactor, wiring conditions, and power supply impedance. |
71 | 86 | 105 | 142 | 170 | 207 | 248 | 300 | 346 | 410 | 584 | 830 | 1031 | |
Input Current (A) at ND
2
Assumes operation at rated output current.
Input current rating varies depending on the power supply transformer,
input reactor, wiring conditions, and power supply impedance. |
86 | 105 | 142 | 170 | 207 | 248 | 300 | 346 | 410 | 465 | 657 | 922 | 1158 |
D1000 kit - DC Supply with Regenerative Active Front End system
Regenerative DC bus supply unit (D1000)
Reference: CIMR-DC_ | 4A0005 | 4A0010 | 4A0020 | 4A0030 | 4A0040 | 4A0060 | 4A0100 | 4A0130 | 4A0185 | 4A0270 | 4A0370 | 4A0630 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. applicable motor capacity (kW) | 3.7 | 7.5 | 15 | 22 | 30 | 45 | 75 | 110 | 160 | 220 | 315 | 560 |
Rated output capacity
(kW)
2
Rated output capacity is calculated with a rated input voltage
of 400 V. |
5 | 10 | 20 | 30 | 40 | 60 | 100 | 130 | 185 | 270 | 370 | 630 |
Rated input current AC (A) | 8 | 16 | 30 | 43 | 58 | 86 | 145 | 210 | 300 | 410 | 560 | 1040 |
Rated output current DC (A) | 8 | 15 | 30 | 45 | 61 | 91 | 152 | 197 | 280 | 409 | 561 | 955 |
Rated input voltage | 3-phase 380 to 480 VAC | |||||||||||
Rated output voltage | 660 VDC | |||||||||||
Rated frequency | 50/60 Hz | |||||||||||
Input power factor | > 0.99 | |||||||||||
Carrier frequency | 6 | 4 | 2 | |||||||||
Degree of protection |
IP20 (CIMR-DC4A0005 to CIMR-DC4A0020 models) IP00 (CIMR-DC4A0030 to CIMR-DC4A0630 models) |
|||||||||||
Ambient humidity | 95% RH or less (without condensation) | |||||||||||
Storage temperature | –20 to 60ºC | |||||||||||
Ambient temperature | –10 to 50ºC |
EMC filter
Reference: B84143_ | A0020R106 | A0035R106 | A0065R106 | B0180S080 | B0400S080 | B1000S080 | B1600S080 |
---|---|---|---|---|---|---|---|
Rated current (A) | 20 | 35 | 65 | 180 | 400 | 1000 | 1600 |
Leakage current (mA) | 3.1 | 3.4 | 3.4 | < 21 | < 21 | < 40 | < 40 |
Rated voltage | 300/520 VAC | ||||||
Rated frequency | 50/60 Hz | ||||||
Rated temperature | 50ºC | ||||||
Degree of protection | IP20 |
Low harmonic filter
Reference: B84143G_ | 0008R176 | 0016R176 | 0030R176 | 0043R176 | 0058R176 | 0086R176 | 0145R176 | 0210S176 | 0300S176 | 0410S176 | 0560S176 | 1140S176 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Rated current (A) | 8 | 16 | 30 | 43 | 58 | 86 | 145 | 210 | 300 | 410 | 560 | 1140 |
Heat loss (W)
2
Heat
loss at nominal current and 20ºC winding temperature with harmonics. |
75 | 140 | 165 | 240 | 260 | 300 | 515 | 665 | 855 | 1398 | 1970 | 4015 |
Rated voltage | 305/530 VAC | |||||||||||
Rated frequency | 50/60 Hz | |||||||||||
Rated temperature | 50ºC | |||||||||||
Degree of protection | IP00 |
R1000 kit - Regenerative Braking unit system
Regenerative Braking unit (R1000)
Reference: CIMR-RC_ | 4A03P5 | 4A0005 | 4A0007 | 4A0010 | 4A0014 | 4A0017 | 4A0020 | 4A0028 | 4A0035 | 4A0043 | 4A0053 | 4A0073 | 4A0105 | 4A0150 | 4A0210 | 4A0300 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. applicable motor capacity (kW) |
3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | 110 | 160 | 220 | 315 |
Rated output capacity
(kW)
2
Rated output capacity is calculated with a rated input voltage
of 400 V. |
3.5 | 5 | 7 | 10 | 14 | 17 | 20 | 28 | 35 | 43 | 53 | 73 | 105 | 150 | 210 | 300 |
Rated input current AC (A) | 5 | 8 | 11 | 16 | 22 | 27 | 32 | 43 | 54 | 66 | 81 | 110 | 161 | 237 | 326 | 466 |
Rated output current DC (A) | 7 | 11 | 15 | 22 | 30 | 36 | 43 | 58 | 73 | 89 | 109 | 149 | 217 | 320 | 440 | 629 |
Rated input voltage | 3-phase 380 to 480 VAC | |||||||||||||||
Rated frequency | 50/60 Hz | |||||||||||||||
Power factor | > 0.9 at full load | |||||||||||||||
Degree of protection |
IP20 (CIMR-RC4A03P5 to CIMR-RC4A0028 models) IP00 (CIMR-RC4A0035 to CIMR-RC4A0300 models) |
|||||||||||||||
Ambient humidity | 95% RH or less (without condensation) | |||||||||||||||
Storage temperature | –20 to 60ºC | |||||||||||||||
Ambient temperature | –10 to 50ºC |
Current suppression reactor
Reference: B150_ | 9105 | 9106 | 9107 | 9108 | 9109 | 9110 | 4118 | 9111 | 9112 | 9113 | 9114 | 5002 | 5008 | 5011 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rated current (A) | 7.5 | 10 | 15 | 25 | 30 | 40 | 50 | 60 | 75 | 100 | 161 | 237 | 326 | 466 |
Inductance (mH) | 1.2 | 0.6 | 0.4 | 0.3 | 0.2 | 0.15 | 0.12 | 0.1 | 0.08 | 0.06 | 0.04 | 0.03 | 0.02 | 0.013 |
Heat loss (W) | 21 | 19 | 23 | 36 | 33 | 40 | 46 | 56 | 81 | 72 | 95 | 105 | 120 | 160 |
Dimensions
Open-Chassis [IP00]
Figure 1
Figure 2
Figure 3
Figure 4
Voltage class | Max. applicable motor output kW |
Inverter model CIMR-A_ |
Figure | Dimensions in mm | Weight kg |
|||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ND | HD | W | H | D | W1 | W2 | W3 | W4 | H1 | H2 | D1 | t1 | t2 | d | ||||
Three-phase 200V |
30 | 22 | 0110 | 1 | 250 | 400 | 258 | 195 | 10 | – | – | 385 | 7.5 | 100 | 2.3 | 2.3 | M6 | 21 |
37 | 30 | 0138 | 275 | 450 | 220 | 435 | 25 | |||||||||||
45 | 37 | 0169 | 325 | 550 | 283 | 260 | 535 | 110 | 37 | |||||||||
55 | 45 | 0211 | 38 | |||||||||||||||
75 | 55 | 0250 | 450 | 705 | 330 | 325 | 680 | 12.5 | 130 | 3.2 | 3.2 | M10 | 76 | |||||
90 | 75 | 0312 | 80 | |||||||||||||||
110 | 90 | 0360 | 500 | 800 | 350 | 370 | 773 | 13 | 4.5 | 4.5 | M12 | 98 | ||||||
110 | 110 | 0415 | 99 | |||||||||||||||
Three-phase 400 V |
30 | 22 | 0058 | 1 | 250 | 400 | 258 | 195 | 10 | – | – | 385 | 7.5 | 100 | 2.3 | 2.3 | M6 | 21 |
37 | 30 | 0072 | 275 | 450 | 220 | 435 | 25 | |||||||||||
45 | 37 | 0088 | 325 | 510 | 260 | 495 | 105 | 3.2 | 36 | |||||||||
55 | 45 | 0103 | 36 | |||||||||||||||
75 | 55 | 0139 | 550 | 283 | 535 | 110 | 2.3 | 41 | ||||||||||
90 | 75 | 0165 | 42 | |||||||||||||||
110 | 90 | 0208 | 450 | 705 | 330 | 325 | 680 | 12.5 | 130 | 3.2 | 3.2 | M10 | 79 | |||||
132 | 110 | 0250 | 500 | 800 | 350 | 370 | 773 | 13 | 4.5 | 4.5 | M12 | 96 | ||||||
160 | 132 | 0296 | 102 | |||||||||||||||
185 | 160 | 0362 | 107 | |||||||||||||||
220 | 185 | 0414 | 2 | 950 | 370 | 7.7 | 923 | 135 | 125 | |||||||||
250 | 220 | 0515 | 3 | 670 | 1140 | 440 | 6 | 220 | 1110 | 15 | 150 | 216 | ||||||
355 | 315 | 0675 | 221 | |||||||||||||||
500 | 450 | 0930 | 4 | 1250 | 1380 | 1110 | 330 | 440 | 1345 | 545 | ||||||||
630 | 560 | 1200 | 555 |
Enclosed Panel [NEMA Type 1]
Figure 1
Figure 2
Voltage class | Max. applicable motor output kW |
Inverter model CIMR-A_ |
Figure | Dimensions in mm | Weight kg |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ND | HD | W | H | D | W1 | H1 | H2 | D1 | t1 | t2 | d | ||||
Three-phase 200V |
0.75 | 0.4 | 0004 | 1 | 140 | 260 | 147 | 122 | 248 | 6 | 38 | 5 | – | M5 | 3.1 |
1.1 | 0.75 | 0006 | 3.1 | ||||||||||||
2.2 | 1.5 | 0010 | 3.2 | ||||||||||||
3 | 2.2 | 0012 | 3.2 | ||||||||||||
5.5 | 4.0 | 0021 | 164 | 55 | 3.5 | ||||||||||
7.5 | 5.5 | 0030 | 167 | 4.0 | |||||||||||
11 | 7.5 | 0040 | 4.0 | ||||||||||||
15 | 11 | 0056 | 180 | 300 | 187 | 160 | 284 | 8 | 75 | 5.6 | |||||
18.5 | 15 | 0069 | 220 | 350 | 197 | 192 | 335 | 78 | M6 | 8.7 | |||||
22 | 18.5 | 0081 | 2 | 365 | 9.7 | ||||||||||
Three-phase 400 V |
0.75 | 0.4 | 0002 | 1 | 140 | 260 | 147 | 122 | 248 | 6 | 38 | 5 | – | M5 | 3.2 |
1.5 | 0.75 | 0004 | 3.2 | ||||||||||||
2.2 | 1.5 | 0005 | 3.2 | ||||||||||||
3 | 2.2 | 0007 | 164 | 55 | 3.4 | ||||||||||
4.0 | 3 | 0009 | 3.5 | ||||||||||||
5.5 | 4.0 | 0011 | 3.5 | ||||||||||||
7.5 | 5.5 | 0018 | 167 | 3.9 | |||||||||||
11 | 7.5 | 0023 | 3.9 | ||||||||||||
15 | 11 | 0031 | 180 | 300 | 160 | 284 | 8 | 5.4 | |||||||
18.5 | 15 | 0038 | 187 | 75 | 5.7 | ||||||||||
22 | 18.5 | 0044 | 220 | 350 | 197 | 192 | 335 | 78 | M6 | 8.3 |
Ordering information
A1000
① Line filters
① Input AC reactors
① DC reactors
① Output AC reactors
Note: This table corresponds with HD rating. When ND is used, please choose the reactor for the next size inverter.
① Chokes
② Communication cards
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through DeviceNet communication with the host controller. |
|||
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through PROFIBUS-DP communication with the host controller. |
|||
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through CANopen communication with the host controller. |
|||
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through MECHATROLINK-II communication with the host controller. |
|||
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through EtherCAT communication with the host controller. |
|||
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through PROFINET communication with the host controller. |
|||
EtherNet/IP option card1 |
Used for running or stopping the inverter, setting or referencing parameters, and monitoring output frequency, output current, or similar items through EtherNet/IP communication with the host controller. |
③ Accessories
④ Computer software
⑤ D1000 kit - DC Supply with Regenerative Active Front End
Regenerative DC bus supply unit (D1000)2 |
EMC filter1 |
Low harmonic filter1 |
||
---|---|---|---|---|
⑤ R1000 kit - Regenerative Braking unit
Regenerative braking unit (R1000)3 |
Current suppression reactor (1%)1 |
||
---|---|---|---|
⑤ Braking unit, braking resistor unit
Braking Resistor4 (10% ED) |
|||||||||
---|---|---|---|---|---|---|---|---|---|
⑥ Feedback speed option card
|
PG-F35 |
||
Specifications
Inverter
200 V class
Motor kW6 |
|||||||||||||||||||
Inverter capacity kVA at HD7 |
|||||||||||||||||||
Inverter capacity kVA at ND2 |
|||||||||||||||||||
3.28 |
53 |
83 |
113 |
17.53 |
253 |
333 |
473 |
603 |
753 |
853 |
1153 |
1459 |
1804 |
2154 |
2834 |
3464 |
4155 |
||
Rated output current (A) at ND10 |
|||||||||||||||||||
Input Current (A) at HD11 |
|||||||||||||||||||
Input Current (A) at ND6 |
400 V class
Motor kW12 |
||||||||||||||
Inverter capacity kVA at HD13 |
||||||||||||||
Inverter capacity kVA at ND2 |
||||||||||||||
1.814 |
3.43 |
4.83 |
5.53 |
7.23 |
9.23 |
14.83 |
183 |
243 |
313 |
393 |
453 |
603 |
||
Rated output current (A) at ND15 |
||||||||||||||
Input Current (A) at HD16 |
||||||||||||||
Input Current (A) at ND5 |
Motor kW17 |
||||||||||||||
Inverter capacity kVA at HD18 |
||||||||||||||
Inverter capacity kVA at ND2 |
||||||||||||||
7519 |
913 |
11220 |
1504 |
1804 |
2164 |
2604 |
3045 |
|||||||
Rated output current (A) at ND21 |
||||||||||||||
Input Current (A) at HD22 |
||||||||||||||
Input Current (A) at ND6 |
D1000 kit - DC Supply with Regenerative Active Front End system
Regenerative DC bus supply unit (D1000)
Rated output capacity (kW)23 |
||||||||||||
EMC filter
Low harmonic filter
Heat loss (W)24 |
||||||||||||
R1000 kit - Regenerative Braking unit system
Regenerative Braking unit (R1000)
Rated output capacity (kW)25 |
||||||||||||||||
Current suppression reactor
Dimensions
Open-Chassis [IP00]
Enclosed Panel [NEMA Type 1]
2. It is not possible to purchase the Regenerative DC bus supply unit (D1000), EMC filter and low harmonic filter as a separate items.
3. It is not possible to purchase the Regenerative braking unit (R1000) and current suppression reactor as a separate items.
4. When connecting a mounting type resistor or braking resistor unit, set system constant L3-04 to 0 (Stall prevention disabled during deceleration). Motor will not stop at set deceleration time if this constant is not changed. Additionally the Internal braking transistor protection (L8-55) should be set to “0” when a external braking unit (CDBR-) is used.
8. Carrier frequency can be increased up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
9. Carrier frequency can be increased up to 5 kHz while keeping this current rating. Higher carrier frequency settings require derating.
10. Carrier frequency is set to 2kHz. Current derating is required in order to raise the carrier frequency.
11. Assumes operation at rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring conditions, and power supply impedance.
14. Carrier frequency can be increased up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
15. Carrier frequency is set to 2kHz. Current derating is required in order to raise the carrier frequency.
16. Assumes operation at rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring conditions, and power supply impedance.
19. Carrier frequency can be increased up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
20. Carrier frequency can be increased up to 5 kHz while keeping this current rating. Higher carrier frequency settings require derating.
21. Carrier frequency is set to 2kHz. Current derating is required in order to raise the carrier frequency.
2. It is not possible to purchase the Regenerative DC bus supply unit (D1000), EMC filter and low harmonic filter as a separate items.
3. It is not possible to purchase the Regenerative braking unit (R1000) and current suppression reactor as a separate items.
4. When connecting a mounting type resistor or braking resistor unit, set system constant L3-04 to 0 (Stall prevention disabled during deceleration). Motor will not stop at set deceleration time if this constant is not changed. Additionally the Internal braking transistor protection (L8-55) should be set to “0” when a external braking unit (CDBR-) is used.
8. Carrier frequency can be increased up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
9. Carrier frequency can be increased up to 5 kHz while keeping this current rating. Higher carrier frequency settings require derating.
10. Carrier frequency is set to 2kHz. Current derating is required in order to raise the carrier frequency.
11. Assumes operation at rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring conditions, and power supply impedance.
14. Carrier frequency can be increased up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
15. Carrier frequency is set to 2kHz. Current derating is required in order to raise the carrier frequency.
16. Assumes operation at rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring conditions, and power supply impedance.
19. Carrier frequency can be increased up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
20. Carrier frequency can be increased up to 5 kHz while keeping this current rating. Higher carrier frequency settings require derating.
21. Carrier frequency is set to 2kHz. Current derating is required in order to raise the carrier frequency.
Aksesuarlar
Regenerative accessories
D1000 kit - DC Supply with Regenerative Active Front End system
Regenerative DC bus supply unit (D1000)
Rated output capacity (kW)1 |
||||||||||||
EMC filter
Low harmonic filter
Heat loss (W)2 |
||||||||||||
R1000 kit - Regenerative Braking unit system
Regenerative Braking unit (R1000)
Rated output capacity (kW)3 |
||||||||||||||||
Current suppression reactor
Size nasıl yardımcı olabiliriz?
Sorularınız veya fiyat teklifi almak için lütfen bizimle iletişime geçin ya da bir talep gönderin.
İletişime geçin A1000
Teşekkür ederiz. Talebiniz konusunda en kısa sürede bilgilendirileceksiniz.
Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]
DownloadIçin teklif A1000
Bu form ile seçtiğiniz ürün için bir teklif isteyebilirsiniz. * ile işaretli bölümleri doldurmak zorunludur. Kişisel bilgileriniz gizli kalacaktır.
Talebiniz için teşekkür ederiz. En kısa zamanda size bilgi verilecektir.
Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]
Downloadİlgili ürünler
-
İnvertörler ve servolar için tek bir yazılım aracı
-
Otomasyon sisteminiz için tek bir yazılım
-
Vinç özel fonksiyonları