G70D | Omron, Türkiye

Oturum açın

Please use more than 6 characters. Forgot your password? Click here to reset.

Parolayı değiştirin

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Kaydol

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Omron'a kaydolduğunuz için teşekkür ederiz

Hesabınızı tamamlamanız için şu adrese bir e-posta gönderildi:

Web sitesine geri dönün

doğrudan erişim

Bilgilerinizi aşağıya girin ve bu sayfadaki içeriğe doğrudan erişin

Text error notification

Text error notification

Checkbox error notification

Checkbox error notification

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Gösterdiğiniz ilgi için teşekkür ederiz

Artık şuna erişebileceksiniz: G70D

Şu adrese bir onay e-postası gönderildi:

Sayfaya devam edin

Bu belgeyi indirmek için lütfen veya doğrudan erişim edinin

G70D

G70D-VSOC16 / VFOM16

Kullanımı kolay, Yer tasarrufu sağlayan 16 noktalı Çıkış terminali

  • İnce klemens sadece 135 × 40 mm'dir (G × D).
  • Bağımsız kontaklar ve kısa çubuklar sık kullanılan bağlantıların kolayca yapılmasını sağlar.
  • Enerji iletim hattı bağlantıları için bir Genişletme Klemensi takılabilir.
  • M3.5 çatal tipi sıkıştırmalı terminaller (maksimum 6,2 mm terminal genişliğiyle) kullanılabilir.
  • Kol mekanizması Rölelerin alet kullanmadan kolayca takılmasını ve çıkarılmasını sağlar.
  • Röle modelleri ve güç MOSFET Rölesi modelleri mevcuttur.
  • Çalışma göstergeleriyle donatılmıştır.
  • DeviceNet bağlantısı için DRT2-OD32ML G/Ç Terminali veya CompoBus/S bağlantısı için SRT2-VOD16ML Konnektör Terminali ile birleştirilebilir.
  • Dahili diyot, bobin şok dalgasını emer.
  • DIN rayına takın ya da vidalı montaj yapın.

Özellikler ve sipariş bilgisi

Ordering Information

Relay Terminals

Classification Points Internal I/O common Rated voltage Order code
Relay outputs 16 points (SPST-NO × 16) NPN (+common) 24 V DC G70D-VSOC16
Power MOSFET relay outputs G70D-VFOM16
Note:

These are all non-standard model and require a special order. Contact your OMRON representative for details on availability.

Accessories (Order Separately)

Cables for I/O Relay Terminals XW2Z-R

Type Order code
Cable with Loose Wire and Crimp Terminals XW2Z-RYC
Cable with Loose Wires XW2Z-RAC
Cable with connectors Fujitsu connectors 1:1 XW2Z-RC
1:2 XW2Z-RIC-
XW2Z-ROC-
1:3 XW2Z-RC--
MIL connectors 1:1 XW2Z-RIC
XW2Z-ROC
1:2 XW2Z-RI--D
XW2Z-RM--D
XW2Z-RO--D1

Relay Terminal

Appearance Applicable Output Relay Terminals Order code
G70D-VSOC16 G70D-ET
2
This is a non-standard model and requires a special order. Contact your OMRON representative for details on availability.
G70D-VFOM16

Short Bar

Appearance Applicable Output Relay Terminals Order code
G70D-VSOC16 G6D-4-SB
G70D-VFOM16

Replacement Relays

Applicable Output Relay Terminals Rated voltage Order code
G70D-VSOC16 24 V DC G6D-1A-ASI-AP DC24
2
This is a non-standard model and requires a special order. Contact your OMRON representative for details on availability.
G70D-VFOM16 G3DZ-2R6PL DC24
2
This is a non-standard model and requires a special order. Contact your OMRON representative for details on availability.

Accessories for DIN Track Mounting

Refer to your OMRON website for details on the PFP-.

Specifications

Relay Specifications

The following specifications apply to G6D Relays mounted in a G70D Relay Terminal and not the G6D Relay itself.

Coil Ratings (per G6D Relay)

Rated voltage 24 VDC
Rated current 10.5 mA
Coil resistance 2,880 Ω
Must-operate voltage 70% max. of rated voltage
Must release voltage 10% min. of rated voltage
Max. voltage 130% of rated voltage
Power consumption Approx. 200 mW
Note:
  1. The must-operate voltage is 75% or less of the rated voltage if the relay is mounted upside down.
  2. Rated current and coil resistance were measured at a coil temperature of 23° C with a tolerance of ±10%.
  3. Operating characteristics were measured at a coil temperature of 23° C.
  4. The maximum allowable voltage is the maximum value of the allowable voltage range for the relay coil operating power supply. There is no continuous allowance.
  5. The rated current includes the terminal’s LED current.

Contact Ratings (per G6D Relay)

Load Resistive load (cosφ = 1)
Rated load 3 A at 250 VAC, 3 A at 30 VDC
Rated carry current 5 A
2
Up to 5 A can be carried when 8 or fewer outputs are ON.
Max. switching voltage 250 VAC, 30 VDC
Max. switching current 5 A
Max. switching capacity (reference value) 1,250 VA, 150 W
Min. permissible load
(reference value)
2
This value is for a switching frequency of 120 times per minute.
5 VDC, 1 mA
Endurance Electrical 100,000 operations min.
(under and at the rated load at 1,800 operations/h)
Mechanical 20,000,000 operations min.
(at 18,000 operations/h)

Power MOSFET Relay Specifications

The following values apply to G3DZ Relays mounted in a G70D Output Block and not the G3DZ Relay itself.

Input (per G3DZ Power MOSFET Relay)

Rated voltage 24 VDC
Operating voltage 19.2 to 28.8 VDC
Voltage level Must-operate 19.2 VDC max.
Must release 1 VDC min.
Input impedance 4 kΩ±20%
Rated current 8.2 mA±20%
Note:

The rated current includes the current consumption of the operation indicator.

Output (per G3DZ Power MOSFET Relay)

Load voltage 3 to 264 VAC, 3 to 125 VDC
Load current 100 μA to 0.3 A
Inrush current 6 A (10 ms)

Characteristics

Item G70D-VSOC16 G70D-VFOM16
Relay outputs Power MOSFET Relay outputs
Contact configuration 16 points (SPST-NO × 16)
Contact structure Single
Contact resistance 100 mW max.
2
Measurement: 1 A at 5 V DC.
Isolation method Photocoupler
Must-operate time 10 ms max.
2
Ambient temperature: 23°C.
10 ms max.
Release time 10 ms max.
2
Ambient temperature: 23°C.
15 ms max.
Output ON-resistance 2.4 W max.
Open-circuit leakage current 10 mA max. (at 125 V DC)
Max. switching frequency

Mechanical: 18,000 operations/h

Rated load: 1,800 operations/h

Insulation resistance 100 MW min. (at 500 V DC)
Dielectric strength 2,000 V AC for 1 min between coil and contact 2,000 V AC for 1 min between input and output terminals
Noise immunity

Power input (normal mode): 600 V for 10 min with a pulse width of 100 ns to 1 ms

Power input (common mode): 1.5 kV for 10 min with a pulse width of 100 ns to 1 ms

Input cable (coiling): 1.5 kV for 10 min with a pulse width of 100 ns to 1 ms

Unit body (coiling): 600 V for 10 min with a pulse width of 100 ns to 1 ms

Vibration resistance

Destruction: 10 to 55 to 10 Hz, 0.5-mm amplitude (1.0-mm double)

Malfunction: 10 to 55 to 10 Hz, 0.375-mm amplitude (0.75-mm double)

Shock resistance Destruction: 300 m/s2, Malfunction: 100 m/s2
Operating voltage range 24 V DC +10%/–15%
Current consumption Approx. 170 mA at 24 V DC
2
Current consumption is when all points are ON and includes G6D Relay coil current but does not include any external load current.
Approx. 125 mA at 24 V DC
2
Current consumption is when all points are ON and includes G3DZ input current but does not include any external load current.
Cable length

Between block and controller: 5 m max. (reference value for AWG28)

Between block and external device: Dependent on load

LED color Operation indicator: orange
Coil surge absorber Diode (600 V, 1 A)
Ambient temperature Operating: -25 to 55°C (with no icing or condensation)
Ambient humidity Operating: 45% to 85%
Mounting strength No damage when 49 N pull load was applied for 1 s in all directions (except for 9.8 N in direction of rail)
Terminal strength

Tightening torque: 0.78 to 118 N·m

Pull strength: 49 N for 1 min

Weight
2
The Unit weighs approximately 315 g with the Expansion Terminal Block mounted.
Approx. 280 g
Note:

These values are initial values.

Size nasıl yardımcı olabiliriz?

Sorularınız veya fiyat teklifi almak için lütfen bizimle iletişime geçin ya da bir talep gönderin.

Teklif isteyin
Teklif isteyin
İletişime geçin
İletişime geçin

Dosya indirme