G7TC | Omron, Türkiye

Oturum açın

Please use more than 6 characters. Forgot your password? Click here to reset.

Parolayı değiştirin

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Kaydol

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Omron'a kaydolduğunuz için teşekkür ederiz

Hesabınızı tamamlamanız için şu adrese bir e-posta gönderildi:

Web sitesine geri dönün

doğrudan erişim

Bilgilerinizi aşağıya girin ve bu sayfadaki içeriğe doğrudan erişin

Text error notification

Text error notification

Checkbox error notification

Checkbox error notification

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Gösterdiğiniz ilgi için teşekkür ederiz

Artık şuna erişebileceksiniz: G7TC

Şu adrese bir onay e-postası gönderildi:

Sayfaya devam edin

Bu belgeyi indirmek için lütfen veya doğrudan erişim edinin

G7TC

G7TC

  • Kompakt boyut: 182 (G) × 85 (D) × 68 (Y) mm (8 noktalı Çıkış Klemensi genişliği 102 mm'dir).
  • Konnektör üzerinden PLC'ye bağlanır ve yalnızca bir kez bastırarak oturtmak yeterlidir.
  • Şok dalgası bastırıcı devresi entegredir.
  • LED çalışma göstergelerini kullanarak G/Ç sinyal durumunun anında tanınması.
  • G7T yerine G3TA G/Ç Solid state röle monte edilebilir.
  • DIN rayına kolayca monte edilir.
  • UL, CSA tarafından onaylanmıştır (G7TC-OC16-1 hariç).

Özellikler ve sipariş bilgisi

Ordering Information

I/O Relay Terminal

I/O classification I/O points Internal I/O common Rated voltage Order code
Input 16 NPN (– common) 12 VDC G7TC-ID16
24 VDC
100 (110) VDC
100/(110) VAC G7TC-IA16
200/(220) VAC
Output 16 NPN (+ common) 12 VDC G7TC-OC16
24 VDC
PNP (– common) 12 VDC G7TC-OC16-1
2
Not approved by UL, CSA.
24 VDC
8 NPN (+ common) 12 VDC G7TC-OC08
24 VDC
Note:
  1. When ordering, add the rated coil voltage to the model number. Example: G7TC-ID1 24 VDC
  2. When the G7TC is used with an AC rated voltage, three rated currents can be used. If a coil voltage of 110 or 220 VAC is used, 50 Hz cannot be used.

Accessories (Order Separately)

Cable for I/O Relay Terminals XW2Z-R

Type Order code
Cable with Loose Wire and Crimp Terminals XW2Z-RYC
Cable with Loose Wires XW2Z-RAC
Cable with connectors Fujitsu connectors (1:1) XW2Z-RC
(1:2) XW2Z-RIC-
XW2Z-ROC-
(1:3) XW2Z-RC--
MIL connectors (1:1) XW2Z-RIC
XW2Z-ROC
(1:2) XW2Z-RI--D
XW2Z-RM--D
XW2Z-RO--D1
Note:

Refer to Connecting Cables for details.

Short Bar

Item Order code
Short Bar G78-04

Output Short-Circuit Module

Item Order code
Output Short-Circuit Module G77-S

Socket

Item Order code
Socket P7TF-05

Mounted Relays and I/O Terminal Sockets

Mounted Relays (G7T I/O Relays and G3TA I/O SSRs)

I/O Terminal Sockets (P7TF-IS16/OS16/OS08)

Refer to Safety Precautions for details.

Indicator Module (With Surge Suppressing Function)

Applicable relay coil voltage Remarks Order code
For AC relay 100 (110) V AC Varistor surge suppression P70A
200 (220) V AC
For DC relay 12/24 V DC Diode surge suppression P70D
Note:
  1. Order the indicator module suitable for the relay coil voltage.
  2. The indicator module for DC relays can be used with a 12-V or 24 V DC power supply.

Accessories for DIN Track Mounting

Appearance Name Minimum order (quantity) Order code
DIN Tracks 1 m 1 PFP-100N
0.5 m PFP-50N
End Plate 10 PFP-M
2
Please order in sets of 10 units.
Spacer PFP-S
2
Please order in sets of 10 units.

Specifications

Coil Ratings (Common to Input/Output per Relay)

Item Rated current (mA) Coil resistance
(Ω)
Must
operate
Must
release
Maximum
voltage
Power consumption
Rated voltage (V) 50 Hz 60 Hz of rated voltage per Relay per 16 Relays
AC 100/(110) 8.2/– 7/7.7 8,700 80% max. 30% min. 105% 0.7 VA 11 VA
200/(220) 4.1/– 3.5/3.85 33,300
DC 12 42 290 80% max. 10% min. 105% 0.5 W 8 W
24 21 1,150
100/110 5 20,000
Note:
  1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of 15%/-20% for AC rated current and ±15% for coil resistance.
  2. The operating characteristics are measured at a coil temperature of 23°C.
  3. The value for maximum voltage is the maximum value within the allowable voltage fluctuation range for the relay coil’s operating power supply. Continuous operation at this voltage is not within product specifications.
  4. Approx. 4 mA flows into each LED indicator. To calculate the power supply capacity, add the current value of each LED indicator.
  5. When the G7TC is used with an AC rated voltage, three rated currents can be used. If a coil voltage of 110 or 220 VAC is used, 50 Hz cannot be used.

Contact Ratings (G7T I/O Relay)

Classification For input For output
Item

Resistive load (cosϕ=1)

Inductive load
(cosϕ=0.4 L/R=7 ms)

Resistive load (cosϕ=1)

Inductive load
(cosϕ=0.4 L/R=7 ms)
Rated load 1 A at 24 VDC 0.5 A at 24 VDC 2 A at 220 VAC
5 A at 24 VDC
1 A at 220 VAC
2 A at 24 VDC
Rated carry current 1 A 5 A
Max. switching voltage 250 VAC, 125 VDC
Max. switching current 1 A 0.5 A 5 A 2 A
Error rate (reference value)
2
The above values are for a switching frequency of 120 operations/min.
100 μA at 1 V 10 mA at 5 V
Electrical endurance 10,000,000 operations (at 10 mA)
50,000 operations (at 1 A)
2,500,000 operations (at 10 mA)
20,000 operations (at 1 A)
1,000,000 operations (under rated load)
Mechanical endurance 50,000,000 operations

Characteristics

Item G7TC-IA16
(Input, AC coil)
G7TC-ID16
(Input, DC coil)
G7TC-OC16 (–1)
(output, DC coil)
G7TC-OC08
(output, DC coil)
Contact form SPST-NO × 16 SPST-NO × 8
Contact mechanism Bifurcated crossbar contact Single contact
Contact material Au cladding + Ag AgInSn
Contact resistance
2
Measurement: 1 A at 5 VDC.
50 mΩ max.
Must Operate time
2
Ambient temperature: 23°C.
15 ms max.
Release time
2
Ambient temperature: 23°C.
15 ms max.
Max. switching
frequency
Mechanical limit 18,000 operations/h
At rated load 1,800 operations/h
Insulation resistance 100 MΩ (at 500 VDC)
Dielectric
strength
Between coil and contact 2,000 VAC, 50/60 Hz for 1 minute
Between same polarity contacts 1,000 VAC, 50/60 Hz for 1 minute
Between paired connectors
2
This is between connector pin No. 10 and 20, and between connector pin No. 9 and 19.
250 VAC, 50/60 Hz for 1 minute
Vibration resistance 10 to 55 to 10 Hz with 0.5-mm single amplitude (1.0-mm double amplitude)
Shock resistance 200 m/s2
Noise immunity Noise level: 1.5 kV; pulse width: 100 ns to 1 μs
Rated voltage between positive and
negative terminal blocks
Rated voltage of controller’s (PLC or other) input circuit

12 VDC ±5%

24 VDC ±5%

Rated current between positive and
negative terminal blocks
Input circuit current of controller (PLC or other) × number of ON points

12 VDC: 46 mA × number of ON points

24 VDC: 25 mA × number of ON points

Cable length
2
Connecting cables up to 5 m are available as standard products. For longer cables, enquire separately.
To controller 5 m max. (reference value)
To I/O devices 50 m max. (reference value, for 2-mm2 CVV cable) Dependent on load
Ambient operating temperature 0 to 55°C
Ambient operating humidity 35% to 85% (with no icing or condensation)
Tightening torque for external connections 0.78 to 1.18 N·m
Tensile strength No damage when a tensile force of 49 N is applied in each direction.
In the direction of the track, the tensile strength is 9.8 N min.
I/O terminal tightening torque Tightening strength: 0.98 N·m; Tensile strength 49 N per minute
LED color Red Green
Case color Transparent red Transparent green Transparent green
Coil surge absorber Varistor Diode (1 A, 1,000 V)
Weight Approx. 640 g Approx. 630 g Approx. 670 g Approx. 350 g
Note:

The above values are initial values.

Approved Standards

  • The rated values for safety standard certification are not the same as individually defined performance values. Always check the specifications before use.
  • Standard G7TC I/O Relay Terminal, except for the G7TC-OC16-1 and the G7TC-OC08, have met UL and CSA standards (UL file no. E95399; CSA file no. LR35535).

UL standard certification (File No. E95399)

Model Standard number Category Listed/Recognized Contact ratings

G7TC-ID16

G7TC-IA16

UL508 NRAQ2 Recognized

Terminal block side: 250 VAC max./point

Connector side: 10 mA/point, 24 VDC

G7TC-OC16 UL508 NRAQ2 Recognized

Terminal block side:

Inductive load: 10 A, 250 VAC

Resistive load: 10 A, 30 VDC

Rated horsepower: 1/2 HP, 240 VAC

CSA Standard (File No. LR35535)

Model Standard number Class number Contact ratings
G7TC-ID16

CSA C22.2

No.14

3211 04

6 to 240 VAC

6 to 125 VDC

G7TC-IA16
G7TC-OC16

Size nasıl yardımcı olabiliriz?

Sorularınız veya fiyat teklifi almak için lütfen bizimle iletişime geçin ya da bir talep gönderin.

+90 (216) 556 51 30
Bizimle iletişime geçin

İletişime geçin

* ile işaretli bölümleri doldurmak zorunludur. Kişisel bilgileriniz gizli kalacaktır.

Text area error notification

Text error notification

Text error notification

Text error notification

Text error notification

Text error notification

Text error notification

Country error notification

Checkbox error notification

Checkbox error notification

Teşekkür ederiz. Talebiniz konusunda en kısa sürede bilgilendirileceksiniz.

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download
Fiyatlama
Fiyat teklifi isteyin

Teklif isteyin

Bu form ile seçtiğiniz ürün için bir teklif isteyebilirsiniz. * ile işaretli bölümleri doldurmak zorunludur. Kişisel bilgileriniz gizli kalacaktır.

G7TC

Text error notification

Text error notification

Text error notification

Select notification error

Select notification error

Country error notification

Text error notification

Text error notification

Text error notification

Text area error notification

Checkbox error notification

Checkbox error notification

Talebiniz için teşekkür ederiz. En kısa zamanda size bilgi verilecektir.

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Dosya indirme