Oturum açın

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Kaydol

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Omron'a kaydolduğunuz için teşekkür ederiz

Hesabınızı tamamlamanız için şu adrese bir e-posta gönderildi:

Web sitesine geri dönün

doğrudan erişim

Bilgilerinizi aşağıya girin ve bu sayfadaki içeriğe doğrudan erişin

Text error notification

Text error notification

Checkbox error notification

Checkbox error notification

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download

Gösterdiğiniz ilgi için teşekkür ederiz

Artık şuna erişebileceksiniz: E3NX-MA

Şu adrese bir onay e-postası gönderildi:

Sayfaya devam edin

Bu belgeyi indirmek için lütfen veya doğrudan erişim edinin

E3NX-MA

E3NX-MA

Akıllı Fiber Amplifikatör Üniteleri

2 kanallı Amplifikatör, kurulum alanını yarıya indirir. Boyutu Küçültülmüş Ekipman ve Kontrol Panoları

  • Yeni 2 kanallı amplifikatör ünitesi iki ünitenin fonksiyonlarını tek bir genel ünite boyutlarına sığdırır, böylece ekipmanınız ve kontrol panolarınızın boyutu küçültülmüş olur.
  • Şeffaf objelerden düşük yansımalı iş parçalarına kadar son derece kararlı algılama performansı ve iki kanal.
  • Işık yoğunluğunu ve sınırını otomatik olarak ayarlamak kolaydır.
  • Kablolama işlerini azaltarak kablo tasarrufu sağlayan Konnektör modelleri.

Özellikler ve sipariş bilgisi

Ordering information

Type

Connecting method

Appearance

Inputs/outputs

Order code

NPN output

PNP output

2-channel models

Standard Type

Pre-wired (2 m)

 

2 outputs

E3NX-MA11

E3NX-MA41

Wire-saving Connector

 

2 outputs

E3NX-MA6

E3NX-MA8

Model for Sensor Communications Unit1

Connector for Sensor Communications Unit

 

E3NX-MA0

Specifications

Type

Standard Type

Model for Sensor Communications Unit

NPN output

E3NX-MA11

E3NX-MA6

E3NX-MA0

PNP output

E3NX-MA41

E3NX-MA8

Connecting method

Pre-wired

Wire-saving Connector

Connector for Sensor Communications Unit

Inputs/outputs

Outputs

2 outputs

2

External inputs

Light source (wavelength)

Red, 4-element LED (625 nm)

Response time

Super-high-speed mode (SHS)

Operate or reset: 100 μs

High-speed mode (HS)

Operate or reset: 450 μs

Standard mode (Stnd)

Operate or reset: 1 ms

Giga-power mode (GIGA)

Operate or reset: 16 ms

Sensitivity adjustment

Smart Tuning (2-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning, or percentage tuning (-99% to 99%)) or manual adjustment

Maximum connectable Units

30

With E3NW-ECT: 30 units3

With E3NW-CCL: 16 units

No. of Units for mutual interference prevention4 5

9

Functions

Automatic power control (APC)

Always enabled.

Dynamic power control (DPC)

Provided

Timer

Select from timer disabled, OFF-delay, ON-delay, one-shot, or ON-delay + OFF-delay timer: 1 to 9,999 ms

Zero reset

Negative values can be displayed. (Threshold value is shifted.)

Resetting settings 6

Select from initial reset (factory defaults) or user reset (saved settings).

Eco mode

Select from OFF (digital display lit), Eco ON (digital display not lit), and Eco LO (digital display dimmed).

Bank switching

Select from banks 1 to 4.

Power tuning

Select from ON or OFF.

Output 1

Select from normal detection mode or area detection mode.

Output 2

Select from normal detection mode, AND output mode, OR output mode, XOR output mode,
GAP output mode, Falling synchronization mode, Rising synchronization mode or area detection mode.

Hysteresis width

Select from standard setting or user setting. For a user setting, the hysteresis width can be set from 0 to 9,999.

Ambient illumination (Receiver side)

Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max.

Ambient temperature range7

Operating:

Groups of 1 or 2 Amplifier Units: −25 to 55°C,
Groups of 3 to 10 Amplifier Units: −25 to 50°C,
Groups of 11 to 16 Amplifier Units: −25 to 45°C,
Groups of 17 to 30 Amplifier Units: −25 to 40°C

Storage:
−30 to 70°C (with no icing or condensation)

Operating:

Groups of 1 or 2 Amplifier Units: 0 to 55°C,
Groups of 3 to 10 Amplifier Units: 0 to 50°C,
Groups of 11 to 16 Amplifier Units: 0 to 45°C,
Groups of 17 to 30 Amplifier Units: 0 to 40°C

Storage:
−30 to 70°C (with no icing or condensation)

Ambient humidity range

Operating and storage: 35 to 85% (with no condensation) within the surrounding air temperature range shown above

Insulation resistance

20 MΩ min. (at 500 VDC)

Vibration resistance (destruction)

10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance (destruction)

500 m/s² for 3 times each in X, Y, and Z directions

150 m/s² for 3 times each in X, Y, and Z directions

Degree of protection

IEC 60529 IP50 (with Protective Cover attached)

Weight
(packed state/Sensor only)

Approx. 115 g/

approx. 75 g

Approx. 60g/

approx. 20g

Approx. 65 g/

approx. 25 g

Materials

Case

Polycarbonate (PC)

Cover

Polycarbonate (PC)

Cable

PVC


1. A Sensor Communications Unit is required if you want to use the Fiber Amplifier Unit on a network.
2. Two sensor outputs are allocated in the programmable logic controller PLC I/O table.
PLC operation via Communications Unit enables reading detected values and changing settings.
3. When connected to an OMRON NJ-series Controller.
4. The tuning will not change the number of units.
The least unit count among the mutual interference prevention units of E3NX and E3NC.
Check the mutual interference prevention unit count and response speed of each model.
5. The mutual interference prevention function is disabled if the detection mode is set to super-high-speed mode.
6. The bank is not reset by the user reset function or saved by the user save function.
7. When the number of connected units is 11 or more, the ambient temperature is less than 50°C.
1. A Sensor Communications Unit is required if you want to use the Fiber Amplifier Unit on a network.
2. Two sensor outputs are allocated in the programmable logic controller PLC I/O table.
PLC operation via Communications Unit enables reading detected values and changing settings.
3. When connected to an OMRON NJ-series Controller.
4. The tuning will not change the number of units.
The least unit count among the mutual interference prevention units of E3NX and E3NC.
Check the mutual interference prevention unit count and response speed of each model.
5. The mutual interference prevention function is disabled if the detection mode is set to super-high-speed mode.
6. The bank is not reset by the user reset function or saved by the user save function.
7. When the number of connected units is 11 or more, the ambient temperature is less than 50°C.

Size nasıl yardımcı olabiliriz?

Sorularınız veya fiyat teklifi almak için lütfen bizimle iletişime geçin ya da bir talep gönderin.

+90 (216) 556 51 30
Bizimle iletişime geçin

İletişime geçin E3NX-MA

E3NX MA prod

* ile işaretli bölümleri doldurmak zorunludur. Kişisel bilgileriniz gizli kalacaktır.

Text error notification

Text error notification

Text error notification

Text error notification

Text error notification

Text error notification

Country error notification

Text area error notification

Checkbox error notification

Checkbox error notification

Teşekkür ederiz. Talebiniz konusunda en kısa sürede bilgilendirileceksiniz.

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download
+90 (216) 556 51 30
+90 (216) 556 51 30
Fiyat teklifi isteyin
Fiyat teklifi isteyin

Için teklif E3NX-MA

Bu form ile seçtiğiniz ürün için bir teklif isteyebilirsiniz. * ile işaretli bölümleri doldurmak zorunludur. Kişisel bilgileriniz gizli kalacaktır.

E3NX MA prod

Kişisel detaylar

E3NX-MA

Text error notification

Text error notification

Text error notification

Text error notification

Text error notification

Text error notification

Country error notification

Teklif ayrıntıları

Select notification error

Select notification error

Text area error notification

Checkbox error notification

Checkbox error notification

Talebiniz için teşekkür ederiz. En kısa zamanda size bilgi verilecektir.

Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]

Download
Fiyat teklifi isteyin
Fiyat teklifi isteyin

Özellikler

Logic operations without PLC

e3nx fa amplifier prod

Her iki fiber kanalı için de diğerleriyle birlikte kullanılan AND, OR, XOR ve GAP fonksiyonları, bir PLC'ye ihtiyaç duymadan basit sinyal işlemeye olanak tanır. Bu sayede, PLC yeniden programlanmadan makinelere sensör kontrolleri eklenebilir.

Space & cost reduction

e3nx fa operations prod

İki standart amplifikatör yerine 2'si 1 arada amplifikatör kullanarak hem alandan hem de donanım maliyetlerinden tasarruf edin.

Dosya indirme